Buy a new Avertx security camera? No worries! We are here to assist you with the complete Avertx camera installation procedure. Commonly, installing a security camera is quite simple but for non-techies, it looks somehow complex. Therefore, to assist the newbies with the detailed camera installation for the first time, we share this brief guide with you.
Here, you find the primary requirements that you need to begin the Avertx camera install process. In addition, from mounting to testing the CCTVs, you find all the relevant information here in this single post. So, to explore further, stay focused on this page!
How to install Avertx camera for seamless performance?
Moreover, while you are heading towards the camera installation procedure, you must get ready with the primary essentials in your hand, such as an active internet connection, power supply, Avertx cameras, ethernet cables, HDMI cord, etc. After that, follow the below-mentioned steps if you are a new user of the Avertx security cameras, let’s have a look:
Unbox the Avertx CCTVs
- Initially, unpack the cameras and an available recorder with them.
- Now, check all the components, like cables, an adaptor, etc. are brand new and not damaged.
- Place all these devices on a flat surface/table where a nearby power outlet is present.
- Also, bring a monitor with HD-quality vision, a keyboard, a mouse, and an extension board (if the power source is far away).
- However, before you learn Avertx camera installation, choose a suitable location to mount your cameras first.
Connect Cables & Access the Recorder Interface
- While you get ready with all the necessary items, start connecting them.
- Firstly, join the monitor and the camera recorder using an HDMI cable.
- Now, connect the mouse and keyboard to the USB ports of the router (at the front or rear panel).
- Next, bring an ethernet cable and link the recorder to the network.
- Afterward, connect the power cord to the recorder and a nearby power outlet. If unable to connect the power cable to the home electrical circuit, then you can use an extension board.
- Now, power on your camera recorder and access its admin interface using the default credentials mentioned in the user manual or on the bottom sticker of it.
- Hereon, follow the on-screen instructions to access the First Setup Wizard and complete the Basic setup of Recorder.
- Further, you need to Create a new Avertx Connect account, so go ahead with the instructions.
- After creating a new account, add your recorder to the newly created Avertx Connect account.
Avertx camera installation & Testing
- While finishing the recorder installation procedure, it is time to install the cameras.
- Before the avertx camera install process is started, check their functioning.
- To do so, connect the CCTVs to the recorder using the 100CAT5e cable.
- Now, turn on the cameras and check these are working properly.
- If you are using the wireless models, then ensure to charge their batteries completely.
- After that, drill the holes to the selected location and ensure these are drilled 10 ft above the ground.
- Further, place the cameras on the drilled holes using the wall mounts, screws/anchors and tighten them properly.
- If you are using the magnet plate, then set it accordingly and tightly.
- Set the camera angle appropriately for the wider coverage view.
- Now, install the Avertx Connect app on your smartphone or use the web/IPn address.
- Hereon, create a user account first by following the guidelines for the chosen method, i.e. app or web GUI.
- Next, click on the Add Devices>Manual and proceed with the instructions.
- Again, check the monitor screen and see all the cameras are shown on it with the appropriate view.
- Finally, you understand how to install Avertx camera successfully.
Wrapping Up
All in all, this brief guide provides you with in-depth information regarding Avertx camera installation. Additionally, you find the primary necessities and detailed steps to carry out such a procedure. By following this guide, you can successfully install your Avertx CCTV cams.